Measuring the head is a starting point for the entire sizing procedure. Due to varying shapes, heads that are apparently the same size when measured by a tape may not necessarily fit the same size helmet.

A small metal tape measure, or a cloth tape may be used to make your initial measurement.

The circumference of the head should be measured at a point approximately one inch above the eyebrows in front, and at a point in the back of the head that results in the largest possible measurement. Take several measurements, to make sure you have the largest one.

PLEASE NOTE THAT THIS IS A ROUGH GUIDE AND NOT EXACT. THE SHAPE OF YOUR HEAD IS AS IMPORTANT AS THE MEASUREMENT WHICH MAY AFFECT FINAL FIT!